Description
A ready-mixed interior insulation plaster containing Portland cement expanded silicates and inorganic fillers. It is modified with additives, which are not harmful to health and the environment, according to European filler directives and ISO requirements. It fulfills HEAT, SOUND, and FIRE insulation conditions.
Field of Application
It is used directly on the interior walls of buildings, columns and beams, on rough and fine plaster, brick, and pumice bloc. Primer must be used necessarily on concrete, gas concrete and painted surfaces.
Packaging
50 L/Sack/Bag (±%02)
Properties
- It is easy to apply and shape.
- Heat Insulation.
- Water Insulation.
- Fire Protection.
- Sound Insulation.
Surface Preparation
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned of dust. Priming must be done on painted surfaces.
Application
Laths that determine the thickness adhere to the prepared surfaces. Between two laths, is filled with a steel trowel or plasterer trowel and gauged. Following the first dry (~ 1-2 hours later ), the slats are removed from the surface and the spaces are filled and the pattern is drawn. if is dry when touched, (12-24 hours later) decorative plaster is drawn. No foreign matter should be added to the prepared mixture. (Lime, Plaster, Cement, etc.)
Application Details
In manual application, it should be mixed with ~ 8-10 liters of water at low speed (400-600 rev/min) and drilled for 3-4 minutes. In machine application, it should be pumped to the surface by mixing with 8-10 liters of water on average. When the desired thickness is reached, it should be allowed to dry.
Application Conditions
Application surface and ambient temperature should be above 5 °C. Considering excessive moisture loss at temperatures above 35 °C, mixing water should be increased, and the surface should be kept moist by wetting for 1 day after the surface hardening phase. Issues to be considered.
Avoid application under strong wind or sun. The time increases at low temperatures and the time decreases at high temperatures. It should not be applied on frozen, melting, or freezing surfaces within 24 hours. Appropriate plaster mesh should be used at different material junction sand points where movement may be considered.