Description
Cement-based polymer-modified adhesive mortar is used for bonding boards (EPS, Mineral Wool, XPS, etc.) to surfaces such as concrete, brick, and aerated concrete.
Field of Application
- It is used to paste heat insulation boards on aerated concrete, brick, and gas concrete in interior and exterior spaces.
- Residences, shopping centers, and hospitals.
- For horizontal, vertical, and overhead applications.
- On all kinds of mineral surfaces.
- It can be used as a general adhesive for applications except sheathing.
Packaging
25 kg Kraft bag
Properties
- It has high Adhesive strength.
- It is easy to apply and gives shape.
- It demonstrates high resistance to all kinds of climate conditions.
- It is durable.
- It is not flammable.
Application Instructions
Surface Quality: The surfaces must be clean, smooth, solid, and free of substances and residuals preventing adhesion such as all kinds of dust, grease, rust, molding oil, detergents, etc. The surfaces must be smooth, the weak parts must be removed. if there are cracks, pits on the surfaces, or walls on which the applications shall be made, they must be repaired with appropriate repairing mortars. Surface Preparation: The surface on which it should be applied on must be humidified slightly. There must not be moisture and plash. in addition, if the defects are excessive, finishing or rough coat must be made in advance.
Application Method
Frame Method: PH-1055 is applied on all edges of the heat insulation board with the aid of a trowel in the form of the frame. Additionally, two piles of PH-1055 adhesive mortar are placed on the 10 cm. right and 10 cm left sides from the center of the board as the trowel to be a pile. This method is generally used on unleveled or old building walls. In the case of the surface being excessively defective, the heat insulation board should not be forced to be pasted in a malformation manner. In this case, when setting the PH-1055, if the heat insulation board tries to restitute, unidirectional adhesion weaknesses may be seen.
Chiseling Method: The heat insulation board is applied on the surface of the building with the aid of a toothed trowel. This method is generally used on very smooth surfaces. When applied on defective surfaces, adhesion weaknesses may be seen. Only these two methods are usually recommended. Only making lumps without framing is not a correct application method.