Description
A ready-mixed faç ade insulation plaster containing Portland cement, expanded silicates, and
inorganic fillers. It is modified with additives, which are not harmful to health and the environment,
according to European filler directives and ISO requirements. It fulfills HEAT, SOUND, and FIRE
insulation conditions.
Field of Application
It is used directly on the exterior walls of buildings, columns and beams, on rough and fine plaster, brick, and pumice bloc.
The primer must be used necessarily on concrete, gas concrete, and painted surfaces.
Packaging
50 L/Sack/Bag (±%02)
Surface Preparation
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned from dust. Priming must be done on painted surfaces.
Application
Laths that determine the thickness are adhered to the prepared surfaces. Between two laths, is filled with a steel trowel or
plasterer trowel and gauged. Following the first dry (~ -2 hours later ), the slats are removed from the surface and the spaces are filled and the pattern is drawn. if is dry when touched, (12-24 hours later) decorative plaster is drawn. No foreign matter should be added to the prepared mixture.
(Lime, Plaster, Cement, etc.)
Applications Details
In manual application, it should be mixed with ~ 8-10 liters of water with low speed (400-600 rev/min) drill for 3-4 minutes. In machine application, it should be pumped to the surface by
mixing with 8-10 liters of water in average. When the desired thickness is reached, it should be allowed to dry.
Application Conditions
Application surface and ambient temperature should be above 5 °C. Considering excessive moisture loss at temperatures above 35 °C, mixing water should be increased, and the surface should be kept moist by wetting for 1 day after the surface hardening phase.